Home Hardware › Stainless Steel

End Cap, For Nominal Duct Diameter 12 in, For Duct Height 12 in, For Duct Widt... End Cap, For Nominal Duct Diameter 12 in, For Duct Height 12 in, For Duct Width 12 in, Inlet Diameter 12 in, Material Stainless Steel, Overall Length 1 7/8 in, Product Type End Cap, Inside Diameter 12 in, Material Thickness 22 ga, Weight 2.05 lb,... more

Strap Hinge, Stainless Steel Material, Stainless Steel Finish, With Holes, 2 H... Strap Hinge, Stainless Steel Material, Stainless Steel Finish, With Holes, 2 Holes per Leaf, No Ligature Resistant, 270 Degrees Range of Motion, Orientation Non Handed, 6 5/32 in Door Leaf Height, 6 5/32 in Frame Leaf Height, 2 11/16 in Door Leaf... more

Hex Nut, Hex Type Standard Hex, Finish NL-19, Material Grade/Class 18-8, Mater... Hex Nut, Hex Type Standard Hex, Finish NL-19, Material Grade/Class 18-8, Material Stainless Steel, Thread Size 1/2 In.-13, Hex Width 3/4 in, Hex Height 7/16 in, Manufacturer Location Globally Sourced, Dimensional Standards ASME B18.2.2, System of... more

The smooth clean lines give this stainless steel handle bar pull a sophisticat... The smooth clean lines give this stainless steel handle bar pull a sophisticated look. Their universal design matches perfectly with any style of kitchen or bathroom cabinets yet are very easy to be installed. more

Solid Hard Aluminum Anodizing Cabinet Flat Handle Bar Pull. 8-inch. Offer a mo... Solid Hard Aluminum Anodizing Cabinet Flat Handle Bar Pull. 8-inch. Offer a modern touch to any style of cabinetry. Mounting screws included. more

Add a modern touch to any style of cabinetry with these sleek cabinet pulls. T... Add a modern touch to any style of cabinetry with these sleek cabinet pulls. The 6-inch door handles feature a rectangular design and a brushed nickel stainless steel finish. Mounting screws are included. more

Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, For Screw Size 1/4 in, Inside Diameter 0.285 in, Outside Diameter 2 in, Maximum Thickness 0.08 in, System... more

Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finis... Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finish Plain, Thread Size 5/8 In.-18, Overall Length 6 ft, Tensile Strength 65,000 psi, System of Measurement Inch, Thread Direction Right Hand, End Type Straight Cut, Dimensional... more

Fully Threaded Rod, Material Grade/Class 316, Material Stainless Steel, Finish... Fully Threaded Rod, Material Grade/Class 316, Material Stainless Steel, Finish Plain, Thread Size 3/4 In.-10, Overall Length 12 in, Tensile Strength 70,000 psi, System of Measurement Inch, Thread Direction Right Hand, Includes Nuts No, Nut Width Not... more

Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finis... Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finish Plain, Thread Size 3/4 In.-16, Overall Length 3 ft, Tensile Strength 65,000 psi, System of Measurement Inch, Thread Direction Right Hand, End Type Straight Cut, Dimensional... more

Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finis... Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finish Plain, Thread Size 9/16 In.-12, Overall Length 3 ft, Tensile Strength 70,000 psi, System of Measurement Inch, Thread Direction Right Hand, Includes Nuts No, Nut Width Not... more

Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, For Screw Size 3/8 in, Inside Diameter 0.41 in, Outside Diameter 1 1/4 in, Maximum Thickness 0.08 in,... more

Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Stainless Steel, Material Grade/Class 316, Finish Plain, For Screw Size 1/2 in, Inside Diameter 0.535 in, Outside Diameter 2 in, Maximum Thickness 0.08 in, System... more

Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finis... Fully Threaded Rod, Material Grade/Class 18-8, Material Stainless Steel, Finish Plain, Thread Size 1/2 In.-20, Overall Length 6 ft, Tensile Strength 65,000 psi, System of Measurement Inch, Thread Direction Right Hand, End Type Straight Cut, Dimensional... more

Stainless Steel Keyhole Stud Mount Greas Stainless Steel Keyhole Stud Mount Greas more

Recessed Pull Handle Recessed Pull Handle more

Wood Screw, Finish Plain, Material 18-8 Stainless Steel, Drive Phillips, Screw... Wood Screw, Finish Plain, Material 18-8 Stainless Steel, Drive Phillips, Screw Size #12, Fastener Length 2 in, Head Width 0.438 in, Drive Size #3, Pack Size Small, Maximum Head Width 0.438 in, Minimum Head Width 0.389 in, System of Measurement Inch,... more

Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1... Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.21.1, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, For Screw Size 3/8 in, Inside Diameter 0.375 in, Outside Diameter 1 3/4 in, Maximum Thickness 0.065 in,... more

Continuous Hinge, Ligature Resistant No, Stainless Steel Material, 180 Degrees... Continuous Hinge, Ligature Resistant No, Stainless Steel Material, 180 Degrees Range of Motion, Stainless Steel Finish, With Holes, Non Handed Orientation, 1/2 in Overall Knuckle Height, 48 in Door Leaf Height, 48 in Frame Leaf Height, 5/8 in Door Leaf... more

Flat Washer, Flat Washer Type USS, Dimensional Standards ASME B18.21.1, USS, M... Flat Washer, Flat Washer Type USS, Dimensional Standards ASME B18.21.1, USS, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, For Screw Size 1 1/2 in, Inside Diameter 1.625 in, Outside Diameter 3 1/2 in, Maximum Thickness 0.213 in,... more